Mega2560 +1.8''LCD Display +Sensor Shield V5 Module For Arduino Robot

  • $28.41
  • Details Mega2560:MicrocontrollerATmega2560Operating Voltage5VInput Voltage (recommended)7-12VInput Voltage (limits)6-20VDigital I/O Pins54 (of which 14 provide PWM output)Analog In..
    • Ex Tax:$28.41
    • Product Code: 20-011-C48
    • Availability: In Stock





    Operating Voltage


    Input Voltage (recommended)


    Input Voltage (limits)


    Digital I/O Pins

    54 (of which 14 provide PWM output)

    Analog Input Pins


    DC Current per I/O Pin

    40 mA

    DC Current for 3.3V Pin

    50 mA

    Flash Memory

    256 KB of which 8 KB used by bootloader


    8 KB


    4 KB

    Clock Speed

    16 MHz

    SensorShield Module V5:
    Features :

    • Ready to plug amp; play.
    • It can connect to various modules like sensors, servos, relays, buttons,potentiometers
    • Each functional module has buckled port with VCC,GND and Output, which has corresponding port on the Sensor Shield, connectedwith a plain 2.54mm dual-female cable you may start playing already. Buckledbrick cables are like cement for bricks, make the connections easier, secureand more professional looking.

    1.8" Serial TFT LCD Display:

    • Display Mode: 1.8" TFT SPI Interface, Transmissive, Normally white;
    • Display Color: 262K colors;
    • Backlight Type: LED
    • Resolution: 128W * 160H Dots
    • Board Size: 5.00 x 3.4cm
    • View Area: 28.03W * 35.04H mm
    • Dot Size: 0.06W * 3 * 0.18H mm
    • Dot Pitch: 0.18W * 0.18H mm
    • Viewing Angle: 6 o'clock
    • SPI Bus interface
    • IC Driver: ST7735R
    • 5V/3.3V TTL logic Compatible, can be used in 5V/3.3V IO Arduino systemdirectly

    Package List:
    1x Mega2560
    1x SensorShield Module V5
    1x 1.8" Serial TFT LCD Display
    1x USB Cable

    There are no reviews for this product.

    Write a review

    Note: HTML is not translated!
        Bad           Good